From kitchen layout to the cutting list.
Design cabinets to your workshop's own construction rules, place them in the room, and send the cut list, edging and machining files to production, all from one project.
Everything the workshop needs, in one cut list.
Each part of the studio feeds the next. Change a width and the drawers, drawings, edging and machining all follow.
| Edge | Part | Feature | What it covers |
|---|---|---|---|
| CB-01 | Cabinet construction | Alpha and Beta construction families with your grooves, connectors, shelf pins and edging rules. Save any cabinet as a template. | |
| CB-02 | Fronts and hardware | Door and drawer splits, handle alignment, Emuca Vertex and Silver drawers with gallery rails, and lift-up hardware. Kits that can't fit are flagged before they reach the saw. | |
| CB-03 | Kitchen layout | Base, wall, tall and corner cabinets in the room, with appliances, sinks, worktops at a fixed height, and plinth runs. | |
| CB-04 | 3D and presentation | Open drawers and doors, explode an assembly, and polish a render with ComfyUI or Gemini using the Windows launcher. | |
| CB-05 | Dimensioned drawings | Elevations, plans and sections with fronts, gaps, worktop overhang, back setback and runner lengths drawn on. | |
| CB-06 | Workshop outputs | Cut lists with part IDs, grain and edging per edge, tape totals, plinth bars and clips, sheet nesting and ALPHACAM DXF files. |
Four steps from idea to panels.
Set your rules
Pick a construction family and set its edging, grooves and worktop height once.
Build the cabinets
Size each unit and choose fronts, drawers and handles. Problems show up as you go.
Place the room
Line the units up, add worktops and plinths, and check the drawings.
Send to production
Choose materials and tapes, then export the cut list, CSV and machining files.
Join the beta.
We're opening Cabinet Builder Studio to a small group of kitchen makers and carpenters. Tell us about your workshop and how you work today.